Setup Menus in Admin Panel

+447946739882, +2348151453146   INFO@CHESSSUBSEAENGINEERING.ORG
     
Sale!

Subsea Survey, Systems Positioning and Metrology (SSSPM) Level 1 & Level 2

$2450.00 $575.00 exc VAT

Purpose

The purpose of the Subsea Survey, Systems Positioning, and Metrology (SSSPM) Level 1 and Level 2 courses is to provide individuals with the necessary knowledge and skills to perform surveying, positioning, and metrology tasks in subsea environments.

Course Objectives

The SSSPM Level 1 and Level 2 courses aim to provide participants with a comprehensive understanding of subsea surveying, positioning, and metrology. These courses are designed to support individuals in their pursuit of a career in subsea surveying or to enhance their existing knowledge in the field.

Target Audience

This course is structured for engineers from any disciplines working offshore as subsea surveyor, subsea pipeline engineers, subsea engineers, subsea xmas tree engineer, reliability engineers, integrity engineers, offshore engineers, project managers, supervisors and those considering switching careers into subsea & offshore installation engineering. Subsea Survey, Systems Positioning & Metrology Engineering  Level 2 is structured to bridge the needed knowledge gap at beginner’s to intermediate level.

Training Mode: Online

Category:

Description

Subsea Survey, Systems Positioning and Metrology (SSSPM) Level 1 & Level 2 equip participants with the fundamental understanding and practical expertise required to carry out accurate and precise measurements and positioning in the subsea industry.

SSSPM Level 1 Course:

Introduction to Subsea Surveying: Participants are introduced to the field of subsea surveying and its importance in various subsea operations. The course covers the basic principles, methods, and equipment used in subsea surveying, including sonar systems, acoustic positioning, and multibeam echo sounders.

Subsea Positioning Systems: This section focuses on the different positioning systems used in subsea operations. Participants learn about global navigation satellite systems (GNSS), inertial navigation systems (INS), and other advanced positioning technologies. The course covers their principles, limitations, and integration with other surveying equipment.

Data Acquisition and Processing: Participants gain insights into data acquisition techniques for subsea surveys, including data collection, processing, and quality control. The course covers the use of software tools for data management, editing, and analysis in subsea surveying projects.

Subsea Metrology: This module introduces participants to the principles and methods of subsea metrology, which involves precise measurements and alignment of subsea structures and equipment. Participants learn about measurement techniques, instruments, and analysis methods specific to subsea metrology tasks.

Health, Safety, and Environment (HSE) Considerations: This section focuses on the importance of health, safety, and environmental practices in subsea surveying operations. Participants gain an understanding of risk assessment, emergency procedures, and safety regulations specific to subsea environments.

SSSPM Level 2 Course:

The Level 2 course builds upon the knowledge gained in Level 1 and delves deeper into advanced topics and practical applications. The course may include:

Advanced Subsea Survey Techniques: Participants explore advanced survey techniques used in subsea environments, such as side-scan sonar, sub-bottom profiling, and laser scanning. The course covers their applications, data processing methods, and integration with positioning systems.

Subsea Positioning for Construction and Installation: This section focuses on positioning techniques and methodologies for construction and installation activities in subsea projects. Participants learn about dynamic positioning, real-time kinematic (RTK) positioning, and geodetic surveying in the context of subsea operations.

Subsea Metrology for Asset Integrity: Participants gain insights into subsea metrology techniques used for asset integrity management. The course covers techniques for monitoring structural deformation, corrosion assessment, and measurement of critical dimensions in subsea infrastructure.

Case Studies and Practical Exercises: The course may include case studies and practical exercises to apply the learned concepts and enhance problem-solving skills. Participants analyze real-world scenarios, carry out subsea surveying tasks, and interpret and present survey data.

Subsea Survey, Systems Positioning and Metrology (SSSPM) Level 1 & Level 2 covers Subsea Survey, Geotechnical & Geophysical Site Investigation, Subsea Systems Positioning Techniques, Types of Subsea Systems Positioning sensors i.e. USBL, LBL & SBL , Acoustic Positioning Systems, Application of acoustic positioning systems i.e. Installation & Subsea Metrology Case Studies, Accuracy & Repeatability and more.

Course Outline


Importance of surveying in subsea operations
Basic surveying principles and techniques
Overview of subsea surveying equipment and technologies


Global Navigation Satellite Systems (GNSS) and their application in subsea positioning
Inertial Navigation Systems (INS) for subsea operations
Introduction to acoustic positioning and multibeam echo sounders


Data collection methods in subsea surveying
Processing and quality control of subsea survey data
Introduction to software tools for data management and analysis


Principles and methods of subsea metrology
Measurement techniques and instruments used in subsea metrology
Analysis and interpretation of subsea metrology data


Importance of HSE practices in subsea surveying
Risk assessment and safety regulations specific to subsea environments
Emergency procedures and protocols


Side-scan sonar and its applications in subsea surveys
Sub-bottom profiling for seabed mapping and geological studies
Laser scanning for detailed subsea asset mapping and inspection


Dynamic positioning systems in subsea construction and installation activities
Real-Time Kinematic (RTK) positioning techniques for precise subsea positioning
Geodetic surveying methods for accurate subsea measurements


Monitoring structural integrity and deformation using subsea metrology techniques
Corrosion assessment and measurement in subsea infrastructure
Measurement of critical dimensions for asset integrity management


Analysis of real-world case studies in subsea surveying, positioning, and metrology
Interpretation and presentation of survey data

Additional Technical Support Sectional References

Ref 1: Subsea Survey, Positioning & Metrology and Offshore Installation and Vessels
Ref 2: Geotechnical & Geophysical Site Investigation
Ref 3: Surface & Subsea Systems Positioning Techniques
Ref 4: Subsea Acoustic Positioning Systems
Ref 5: Subsea Metrology
Ref 6: Subsea Metrology Deliverables
Ref 7: Dimensional Control Requirements for Metrology
Ref 8: Spool Piece Metrology with Case Study
Ref 9: Calibration of Short Baseline System Steps
Ref 10: Calibration of Long Baseline System Steps
Ref 11: Calibration of Ultra Short Baseline System Steps
Ref 12: Differences between Transmitters and Transducers
Ref 13: Inertial Acoustic Metrology
Ref 14: Inertial Measurent Unit IMU working principle
Ref 15: Subsea Positioning and Navigation
Ref 16: Metrology & Remote Offshore Survey
Ref 17: Offshore Seabed Resistivity Systems
Ref 18: Offshore Marine Resistivity & Measurement Steps
Ref 19: USBL & Underwater Positioning
Ref 20: Subsea Pipelines Tie Ins Spool Fabrication and Installation with USBL Case Study
Ref 21: Global Navigation Satellite System (GNSS)
Ref 22: Long Baseline (LBL) Acoustic Positioning & Steps
Ref 23: Short Baseline (SBL) Acoustic Positioning & Steps
Ref 24: Ultra Short Baseline (USBL) Acoustic Positioning & Steps
Ref 25: Inertial Navigation System (INS)
Ref 26: Terrestrial Laser Scanning Positioning Techniques & Steps
Ref 27: Photogrammetry Positioning Techniques & Steps

Assessment

Participant underpinning knowledge of subsea survey, systems positioning and metrology will be accessed with short answer multiple-choice questionnaire at the conclusion of the course.

Outcome

Participants will gain an in debt understanding of Subsea Survey, Systems Positioning & Metrology Engineering. They will also be able to function with minimum supervision as a Subsea Engineer  or Subsea Survey Engineer for IOCs, subsea pipeline company contractor, vendor or installation company.

Professional Certificate

Issued directly by Chess Subsea Engineering Europe.

Participant may be presented for Offshore Petroleum Training Organization (OPITO) Certification.

How to Register

Click here to download registeration booklet on msword and email completed booklet to info@chesssubseaengineering.org directly.

Get Social with US ON FACEBOOK

9 inch Subsea Production Riser Steep Wave Configuration ORCAflex Simulation

8 inch Subsea Production Riser Lazy S Wave Configuration ORCAflex Fatigue Simulation

8 inch Subsea Production Riser Lazy S Wave Configuration ORCAflex Fatigue Simulation

Transient Flow Over a Cylinder : Pressure Contour

Live Testimonials from some of our Candidates

Transient Flow Over a Cylinder : StreamLine Velocity

Engineering of Subsea Production Systems Level 1 and Level 2

Transient Flow Over a Cylinder : Eddy Viscosity

Subsea Hydraulic Flying Leads & Cable Cutters Engineering Design

Steel Catenary Riser & Hook Up Components Engineering Design

SURFs Carousel Engineering Design 3D Animations

Piggyback Block Render & Subsea Bend Restrictor Engineering Design

16 inch Subsea Pipe Pull In Installation Simulation with ORCAFLEX

16 inch Subsea Lazy S Riser with Mid Water Arch Orcaflex Simulation

8 inch Subsea Production Pipeline S Lay Installation Simulation via Articulated Stinger

Subsea Riser Bouyancy Modules 3D Front End Engineering Conceptual Design & Simulations

10 inch Production Pipeline S Lay Installation Simulation via Articulated Stinger ORCAflex Explicit

16 inch Subsea Pipeline Davit Lift Orcaflex Simulation

8 inch Subsea Production Steel Catenary Riser ORCAflex Simulation

2 x 10 inch Subsea Production Riser Pliant Wave Configuration ORCAflex Simulation

ENGINEERING COMPETENCE AT ITS BEST!

From talent development and organizational performance to engineering and operational needs, we are driven by one goal: improve your performance through innovative solutions.

Continuing Professional Development

Our Renewable Energy, Offshore & Subsea Engineering CPD OJT courses are structured for engineers seeking to attain or maintain Chartered Status. Get to know more.

Computational Fluid Dynamics (CFD)

Using CFD, you are able to analyze complex aerodynamics and hydrodynamics problems involving fluid-fluid, fluid-solid or fluid-gas interaction.

top
© 2023. All Rights Reserved.
X