Setup Menus in Admin Panel

+447946739882, +2348151453146   INFO@CHESSSUBSEAENGINEERING.ORG
     

CLASS IV 30 Meters Scuba

Class IV 30 Meters Scuba course is the starting point of the commercial divers training. This scuba qualification is used by the Police Force; Fire Department; various rescue teams; Marine Archeologists; certain Aqua Culture divers; Media Divers and Scientific Divers. Scuba is the start of basic training for the professional diver using surface supply.

This qualification limits the diver to Scuba diving using small hand tools and conducting simple inspections where no decompression is required with direct access to the water surface. The diver may not operate large surface-controlled power tools, or dive where the use of cranes, air lifts, diver dredging or winches are required.

Course Details: Class IV 30 Meter Scuba
Location: Nigeria. Training will be done in both fresh water and open sea condition.
Cost: N2,500,000 Million Naira only
Duration: N/S

Prerequisites for Class IV:

  • Minimum age 18 years
  • Complete and pass Diving Medical Examination as per SA Diving Regulations and be in a healthy fit state (Done at School Doctor)
  • Be a competent swimmer (pass a swim test 300 meters freestyle in under 10 minutes)
  • Be able to add, subtract, multiply and divide, calculate percentage, solve simple formulas such as gas laws
  • Understand written and verbal communication in English and communicate comfortably with other people
  • Have a practical aptitude (know which way to tighten and loose bolts / nuts)

Some Subjects Covered on the Course:

  • The history of diving as a background overview
  • The physics of diving
  • Diving physiology and first aid
  • Air decompression table and procedures
  • Diving equipment and maintenance for Class IV scuba and personal diving equipment care and maintenance
  • Pre and Post dive checks
  • Diving emergencies and rescues and diving hazards
  • Hand signals, lifeline and voice communications
  • Underwater Scuba tasks and work
  • Scuba diving diver, standby diver and attendant procedures
  • Legislation and guidance
  • Compression chambers
  • High pressure (HP) Compression and Storage banks for filling scuba by decanting
  • Basic seamanship and inflatable boats
  • Day and night diving
  • Fresh water and open sea diving
  • Dry suits and full-face masks
  • Nitrox theory and diving for Nitrox included in Combo class II module or separate on scuba module if selected

Testimonials

Exceeding Customer Expectations via our On the Job Training (OJT) Online & Offline

We are the first choice for subsea engineering and training in the oil, gas and renewables and we stand out thanks to the quality of our technical capabilities and excellent customer service.


Animashaun Musa Bolarinwa

Surveyor, Geodetic Offshore Services Limited, Africa

"The Subsea Survey, Systems Positioning and Metrology (SSSPM) Level 1 & Level 2 training was very enlightening and insightful. It expanded my knowledge of Underwater Acoustic Positioning and Subsea Metrology. I appreciate Chess Subsea for putting up such educative platform while utilizing highly experienced facilitators and cutting-edge resources."

Edward Oluwasegun Oyelade

Trainee Data Processor / Geophysicist, Africa

"Through the SSSPM Level 1 & Level 2 training I was able to connect a lot of my previous knowledge of seabed survey and the gas industry into a big picture of how they operate. I was adequately introduced to metrology with patient description of subsea facilities, the metrology process, terms, and industry standards. I was also exposed to aspects of systems positioning systems new to me. As an aspiring geophysicist, I can say for sure that I have become more knowledgeable of subsea activities."

Odafe Abade

Graduate Production Engineer, Sterling Oil Exploration & Energy Production Company (SEEPCO) Limited, Africa

"I just completed the Natural Gas Engineering Production Process (NGEPP) Level 1 & Level 2 and I must say it has been an insightful experience and a great opportunity to learn new things. My tutor was very thorough with the course outline, his explanation was comprehensive and I really loved how he supported each topic on the course outline with videos in order for to grasp a virtual view of all the processes involve in natural gas processing."

Adelina Adao

Gas Engineer, Betchel, Angola, Africa

"I found the Natural Gas Engineering Production Processes (NGEPP) Level 1 & Level 2 interesting, challenging, and rewarding. I learnt a lot by following the course set out including Oil and Gas Seperation, Gas Dehydration, Petroleum Gas Compression, Natural Gas Liquid Recovery, Oil Pumping and Metering & Water Injection. Assignments were corrected quickly, with lots of positive feedback from the tutors."

Get Social with US ON FACEBOOK

9 inch Subsea Production Riser Steep Wave Configuration ORCAflex Simulation

8 inch Subsea Production Riser Lazy S Wave Configuration ORCAflex Fatigue Simulation

8 inch Subsea Production Riser Lazy S Wave Configuration ORCAflex Fatigue Simulation

Transient Flow Over a Cylinder : Pressure Contour

Live Testimonials from some of our Candidates

Transient Flow Over a Cylinder : StreamLine Velocity

Engineering of Subsea Production Systems Level 1 and Level 2

Transient Flow Over a Cylinder : Eddy Viscosity

Subsea Hydraulic Flying Leads & Cable Cutters Engineering Design

Steel Catenary Riser & Hook Up Components Engineering Design

SURFs Carousel Engineering Design 3D Animations

Piggyback Block Render & Subsea Bend Restrictor Engineering Design

16 inch Subsea Pipe Pull In Installation Simulation with ORCAFLEX

16 inch Subsea Lazy S Riser with Mid Water Arch Orcaflex Simulation

8 inch Subsea Production Pipeline S Lay Installation Simulation via Articulated Stinger

Subsea Riser Bouyancy Modules 3D Front End Engineering Conceptual Design & Simulations

10 inch Production Pipeline S Lay Installation Simulation via Articulated Stinger ORCAflex Explicit

16 inch Subsea Pipeline Davit Lift Orcaflex Simulation

8 inch Subsea Production Steel Catenary Riser ORCAflex Simulation

2 x 10 inch Subsea Production Riser Pliant Wave Configuration ORCAflex Simulation

ENGINEERING COMPETENCE AT ITS BEST!

From talent development and organizational performance to engineering and operational needs, we are driven by one goal: improve your performance through innovative solutions.

Continuing Professional Development

Our Renewable Energy, Offshore & Subsea Engineering CPD OJT courses are structured for engineers seeking to attain or maintain Chartered Status. Get to know more.

Computational Fluid Dynamics (CFD)

Using CFD, you are able to analyze complex aerodynamics and hydrodynamics problems involving fluid-fluid, fluid-solid or fluid-gas interaction.

top
© 2023. All Rights Reserved.
X